DUAL CAPABILITY DRIPPER INSERTING SYSTEM FOR NPC / PC DRIPPERS
Combo Dripper inserting system Line
Dual Capability Dripper Inserting System For NPC / PC Drippers
Non Pressure Compensating Dripper - FLAT
The NPC Dripper TURBO FLAT is made from Very special Polymer is now available in 6 flow rates ranging from 0.8 LPH, 1.3 LPH, 1.6 LPH, 2.0 LPH, 2.4 LPH & 3.8 LPH. These drippers are Clog Resistant drippers duly tested at California Institute of Water Technology. The flexible dripper helps easy sticking to the pipe and is suitable for 6 mil to 36 mil ( 0.15 mm to 0.9mm ).
Pressure Compensating Dripper – FLAT
The PC dripper CYCLONE is available in PC Drain , PC Anti Syphon & PC Non Drain features. These drippers are most suitable for Undulated Terrain , Subsurface Irrigation and Precision Farming in Greenhouses. This dripper is available in following flow rates 1.1 lph , 1.5 lph , 2.4 lph & 3.8 lph.
Combo Dripper Inserting System for NPC & PC dripper : This line has got capability to switch over from PC to NPC and back in a changeover time of 45 minutes. With minimal changeover of the parts one can shift from NPC to PC and back. We offer services to have changeover for the two type of drippers.
Automatic Friction Welding Machine For Sprinkler Pipes
Plastic Part Runner Separator
Advantages of Plastic Part Runner Separator
Specifications
Product to be separated : Flat dripper and runner
Size of dripper : (LXBXT) : To be Provide by customer
Minimum dimension of runner : To be provide by customer
Through put with 8 sec cycle time : 7 lac pieces per day or 29000 pieces per hour or 500 pieces per min of product and 125 pieces of runner shall be separated.
Foot print of machine : 1m Long X 0.6 m wide X 1.5m adjustable height up to 1 m.
Dripper outlet : Below the machine and runner at outlet of drum.
Material of Construction of contact parts: Stainless steel / Plastic.
Frame : Mild steel Powder coated with adjustable angle for drum 0-20 deg.
Drive : AC Geared motor ( Bonfigloli) with friction drive. RPM – 20 RPM.
Top hood : Acrylic/ PC formed cover.
Flat Dripper Runner seperator for 128 cavity x 16 drop mold
Roller/ Runner Separator for Flat Drippers from EES